ru
eng

  • Main page
  • Products
    • SKYTER 3D HD
    • SKYTER IP
    • SKYTER MINI
    • SKYTER LIGHT
  • News
  • Where to buy

Форма поиска

Main page

1
Power button
2
Remote control sensor
3
Standby indicator - green is "on"; red is "off" (standby)
4
1,54” graphic OLED display
5
Channels up/down buttons
6
"DVCrypt" card reader
7
USB 2.0 connection "max 0,5Amp"
8
CI interface slot
2
Satellite LNB A & LNB B (satellite dish A & B input signals). It is used to connect satellite dish / dishes to the receiver. (RF cable/cables are used). In case twin LNB configuration is used, please use two RF cables to connect A & B inputs with the satellite dish. In case single LNB configuration is required, please use one RF cable for LNB A input. LNB A input signal is provided for both A & B inputs. Fully protected 14/18v LNB supply and DISEq commands are provided separately for LNB A & LNB B inputs.
1
Satellite LNB A & LNB B (satellite dish A & B input signals). It is used to connect satellite dish / dishes to the receiver. (RF cable/cables are used). In case twin LNB configuration is used, please use two RF cables to connect A & B inputs with the satellite dish. In case single LNB configuration is required, please use one RF cable for LNB A input. LNB A input signal is provided for both A & B inputs. Fully protected 14/18v LNB supply and DISEq commands are provided separately for LNB A & LNB B inputs.
3
Terrestrial RF IN (Terrestrial RF antenna input) It is used to receive RF signal from terrestrial antenna. 5v of antenna supply is fully protected (0,1Amp current limit) and can be switched on in menu
4
Terrestrial RF OUT (Terrestrial RF output) It is used to connect terrestrial antenna RF to other devices: analogue TV, etc
5
SCART – it is used to connect your receiver to a TV –set using a SCART cable.
6
HDMI It is used to for connect the receiver to a TV-set or a multichannel sound decoder using HDMI cable
7
NET, RJ45 Ethernet port It is used to connect the receiver to a LAN router using RJ45 Ethernet cable
8
USB ports The receiver has 2 USB 2.0 interface ports "max power 1,0Amp each" It is used to connection various USB external devices (keyboards, HDD, etc.)
9
S/PDIF, coaxial output It is used to connect the receiver to a multichannel sound decoder.
10
Power button
11
Power cable
12
Fan
Previous Pause Далее

    Video

    • SKYTER 3D HD
    • SKYTER IP
    • SKYTER MINI
    SKYTER 3D HD IP TV setup
    SKYTER 3D HD recordings manager
    SKYTER 3D HD zapping time
    SKYTER 3D HD media player
    Time shift demo
    Network connection setting up
    First skyter starting up
    SKYTER overview

    News

    HDTV combo Twin DVB-S2 + DVB-T PVR with Hard Disk based on Linux

    The Skyter™ 3D HD is equipped on board with independent two DVB-S2 and single DVB-T tuners as well as an embedded 150Mbps WLAN & 100/10Mbps LAN which allow amazing flexibility to connect on bro

    All news

    Download

    Skyter update
    Skyter 3D HD user manual
    CE certificate
    ТР ТС certificate

    © Skyter 2018 | All rights reserved